How To Measure a 2-Sided Bunker Pile

Updated on October 7, 2025

With SR Measure you can easily perform an inventory measurement of material in a 2-Sided Bunker configuration.

Step-by-Step Instructions

Open SR Measure → tap New Measurement → choose Bunker → select 2-Sided .
Stand to the left of the pile with a clear view of the walls and open faces, then tap Start .
Follow the on-screen guides. When prompted, aim at the inside face of the front bunker wall and tap.
Walk an arc along the open front edge of the pile, keeping the pile in frame. Continue until the on-screen arrow turns green, then stop.
When prompted, tap the next wall (the side wall).
Walk the next arc along that open edge, again until the arrow turns green, keeping the pile in frame.
Return to your starting point, keeping the pile in frame until the arrow turns green again.
Walk one final short arc, keeping the pile in frame so the left side of the back wall is in frame, then make your final tap to complete capture.
Wait a moment while processing completes; your volume and outline will appear.
Tap Save to store the measurement in the app.

Keep a steady pace and hold the phone level; stay a safe, consistent distance from the pile.
Make sure walls and pile edges stay visible—avoid trucks, loaders, or people blocking the view.
If the arrow isn’t green, keep moving along the arc until it is.
Bright sun or glare? Shade the lens with your hand or adjust your angle so the camera sees contrast.