After you’ve completed the process of tagging your piles for measurements, our system will process the 3D data from your flight images and generate the pile measurements.
This process can take anywhere from 4-6 hours depending on the size of the site and quantity of piles.
Follow these steps below to view the measurement reports generated for your site’s flight.
Viewing Aerial Reports From the Dashboard #
The Stockpile Reports Dashboard will include all measurements regardless of what measurement method was used (SR Measure app or drone, for example).
- The blue clipboard icon is how you view the report for a specific pile measurement. Click it!
- You can use the “Sites” filter to look at measurements for specific sites or all sites at once.
- The “Products” tab will show the combined volume/tonnage for each product based on the “Sites” filter you select.
- The “Piles” tab shows only the most recent measurement processed for each pile.
- The “Measurements” tab shows every measurement taken for every pile.
Viewing Aerial Reports From the Aerials Page #
The Aerials Page lists out pending and completed flights for your sites. You can use the “Site(s)” and the Date Range filters to isolate specific flights that you are interested in. This page will only show aerial measurements (it will not include any SR Measure measurements, for example).
- Click the “Aerials” tab in the top right corner
- Click the “View” link to see measurements for a flight that has been processed.
- You have two options for viewing measurements:
Option 1 – In the top-down aerial view, click on one of the blue-highlighted piles with a green pin. This will give you a quickview of the pile measurement. For more information, click on the “Full Report” button.
Option 2 – Below the top-down aerial view is a list of all the measured piles. You can click on the blue clipboard icon for the full report of a specific pile.
